Oil and catalytic converter system product kit for petrol engines

      1. XADO RED CAT SHIELD - cleaner for the catalytic converters of petrol engines.

• OXY8 BOOST BLEND – a complex of combustion catalysts, environmentally friendly oxygenates and octane-number-boosting components ensures complete combustion, reduces CO and HC emissions, protects the catalytic converter from clogging and poisoning, and extends its service life.
• 2xPEA – the most effective double-concentration cleaner, based on polyetheramine (PEA), which reduces the formation of carbon deposits on the surfaces of combustion chamber parts.
• PIBA X-BLEND – the most powerful fuel injection system detergent.
  

USE:

• 1 bottle (250 ml) of the product per 40–60 litres of petrol.
• Before refuelling, pour the required amount of the product into the fuel tank.
• Continue to operate as usual.
  
• Can be used every 2000-5000 km.

       2. XADO RED FLUSH - oil system cleaning.

• An advanced-formula cleaner that safely removes contaminants from the engine oil system, as well as varnish and carbon deposits from the surfaces of combustion chambers, piston crowns and oil rings.
• Completely neutral to rubber and polymer seals.
• The additive is poured into the used oil before changing it, as a detergent or a preventive agent intended for flushing and protecting from wear the oil systems of all types of petrol and diesel engines and mechanical transmissions.

USE:

• Pour the additive into the oil filler port of the engine, switched off and warmed up to operating temperature.
• If the engine is heavily contaminated, drive as usual for 150–200 km.
• With regular use, let the engine idle for 10–15 minutes or drive 20 km.
• Change the oil.

       3. XADO RED BOOSTER - for comprehensive protection of the engine and the oil.

• REVITALIZANT (RF 25) – protects parts against existing wear.
• 2xTBN Boost – restores the antioxidant properties of the oil.
• Viscosity-stabilising additives (Visco-Stabily LM) - to maintain the oil viscosity throughout the whole change interval.
• DD additives (Detergent Dispersant additives) - a detergent additive package designed to increase the filtering capacity of the oil.
• Ester Complex – protects the engine during a cold start.

USE:

• Pour the product, heated to a temperature of at least +25 °C, into the oil filler port of the engine, which is switched off and warmed up to operating temperature.
  
• Let the engine idle for 3–5 minutes. Drive 10 - 20 km without load.
• Continue to operate as usual.