Oil and fuel system product kit for diesel engines

1. XADO RED CLEANER - fuel system cleaning.

• A cetane-number-raising additive designed for complete combustion of fuel, which helps reduce the formation of soot and unburnt particles in the exhaust gases, protecting the diesel particulate filter (DPF - Diesel Particle Filter).
• PURE BURN (2xPEA and PIBSI X-BLEND) - a powerful detergent complex that removes carbon deposits and build-up in the fuel system and injectors, made up of the most effective double-concentration cleaner 2xPEA, based on polyetheramine (PEA), which gives a burnt-on residue removal effect.
• Dispersant additive PIBSI X-BLEND, based on polyisobutylene succinimides (PIBSI), designed to improve fuel properties, for example to prevent soot formation and increase fuel economy.

USE:

• Before refuelling, pour the required amount of the product into the fuel tank.
• 1 pack (250 ml) of the product is intended for 40–60 litres of diesel fuel.
• Then drive as usual.
• Can be used every 3000-5000 km.

2. XADO RED FLUSH - oil system cleaning.

• An advanced-formula cleaner that safely removes contaminants from the engine oil system, as well as varnish and carbon deposits from the surfaces of combustion chambers, piston crowns and oil rings.
• Completely neutral to rubber and polymer seals.
• The additive is poured into the used oil before changing it, as a detergent or a preventive agent intended for flushing and protecting from wear the oil systems of all types of petrol and diesel engines and mechanical transmissions.

USE:

• Pour the additive into the oil filler port of the engine, switched off and warmed up to operating temperature.
• If the engine is heavily contaminated, drive as usual for 150–200 km.
• With regular use, let the engine idle for 10–15 minutes or drive 20 km.
• Change the oil.

3. XADO RED BOOSTER - for comprehensive protection of the engine and the oil.

• REVITALIZANT (RF 25) – protects parts against existing wear.
• 2xTBN Boost – restores the antioxidant properties of the oil.
• Viscosity-stabilising additives (Visco-Stabily LM) - to maintain the oil viscosity throughout the whole change interval.
• DD additives (Detergent Dispersant additives) - a detergent additive package designed to increase the filtering capacity of the oil.
• Ester Complex – protects the engine during a cold start.

USE:

• Pour the product, heated to a temperature of at least +25 °C, into the oil filler port of the engine, which is switched off and warmed up to operating temperature.
  
• Let the engine idle for 3–5 minutes. Drive 10 - 20 km without load.
• Continue to operate as usual.