ATV rear hub 4 points 23 splines

Rear ATV hub with 4 mounting holes and 23 splines (splined grooves): the drawing marks 77 mm between adjacent hole centres, 90 mm across the flange, and at the splined bore – "23 frez." and "Ø 24 / 22,5 mm". Compare with your old hub.

• The hub fits onto the splines of the ATV's rear axle, and the wheel is mounted to it through the four holes
• The line ends show: 77 mm – between the centres of two adjacent holes, while the 90 mm line starts at the middle of the flange's sides, where the sides curve inward
• The listing gives 23 splines, and the drawing marks "23 frez." at the bore — the two match
• The flange is four-cornered, with curved-in sides; the colour is yellowish with a greenish tint. From the side, a tall cylindrical neck is visible on one side and a short ring on the other
• On the other side, four ribs run crosswise from the centre towards the holes
• The photo gives no hole diameter, no flange thickness and no fit for a specific ATV

To be straight with you: what the two numbers in "Ø 24 / 22,5 mm" mean is not explained on the drawing, and the ATV model is not in the name. Before ordering, count the splines on your axle, measure the distance between adjacent hole centres, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56