Hub ATV rear 3 points 23 splines

Rear ATV hub with 3 mounting lugs and 23 splines: the drawing marks an 8,30 mm hole, 25,30 mm at the splined bore, and also 78 mm and 81,30 mm. Hold it against your old hub and compare.

• The hub fits onto the splines of the quad's rear axle; the three lugs with holes are for mounting the wheel
• By the ends of the lines: the 8,30 mm lines rest on the edges of the upper hole, so this is the hole diameter; 78 mm is measured perpendicular between the horizontal lines drawn through the centres of the left and bottom holes
• The 25,30 mm lines come down to the ring around the splined bore, and the upper 81,30 mm line runs through both the edge of the body and the hole – exactly what these two numbers measure, we do not say
• The side photo also marks 36 mm, 6 mm and 8 mm, but the arrows are drawn horizontally and the lines rest on points at different heights, so we do not explain their meaning
• The body is triangular, with three ribs running from the centre to the lugs; on one side – a tall cylindrical neck, on the other – a short ring with fine grooves; the colour is yellowish with a greenish tint
• 23 splines are stated in the name; the drawing does not give their number, and you cannot reliably count them in the photo

To be straight with you: this hub's drawing is confusing, so we rely only on the numbers whose line ends we can clearly see. Which quad it fits is not stated in the name. Before ordering, count the splines on your axle, measure the diameter of the mounting holes and the distances between them, send us a photo of the old part – we will check it before you order.

24-month warranty · tel. +370 685 777 56