ATV brake & throttle lever assembly

ATV brake and throttle lever assembly: one housing holds both the brake lever and the thumb throttle trigger. The photo marks 200 mm across the whole assembly and 72 mm in height.

• The 200 mm arrow rests on the left edge of the clamp and on the lever's ball end – that is the whole assembly, not just the lever. 72 mm was measured from the top of the housing to the bottom edge of the trigger
• The thumb trigger at the bottom is the ATV's throttle: you press it with your thumb rather than twist a grip
• The photo shows a knurled cable adjuster tip, and in the second photo, next to the dimensions, a white two-contact plug is photographed separately – it is the brake light switch connector
• The listing also has a smaller assembly of the same type – "Mini bike ATV brake & throttle lever assembly". That assembly's lever is marked 130 mm, but there only the lever was measured, while here the whole assembly is – the figures are not directly comparable
• The code the supplier lists against this item also appears on another item in the catalogue, so we do not give it as an ordering key
• The clamp bore is the first figure that needs to match – but for THIS item the maker did not mark it. So measure your own handlebar at the clamp point and write us the number: we will check the assembly before you order, so we do not send the wrong one
• Time to replace it: when the lever is bent, when the axle is loose or when the clamp lug is cracked at the bolt
• Some brake levers in the shop sit not in this category but in "Levers / Knobs" – if you cannot find the right one here, open that category
• This category holds different items: separate levers, pairs of them, switch assemblies and master cylinders. It is not a single kit

To be straight with you: the maker marked neither the clamp bore diameter nor the cable thickness. Which specific model and which years this item fits, the maker did not specify, and we do not guess it – but we can match the dimensions for you: write us your model and year. Before ordering, photograph your old assembly from above and from the side so the wires and cable routing show – send us the photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56