Skip to content
CUSTOMER SUPPORT: +370 685 777 56
Unbreakable folding handle right - Image 1
Brake levers

Unbreakable folding handle right

Article no. 62409
8 €
Prices incl. VAT
In stock — Šakiai

Order by 16:00 — Omniva ships today

1
Not sure it fits your bike? Ask our mechanics or see our fitment-by-VIN FAQ
Same-day dispatch — order by 16:00
24-month guarantee
14-day returns
In stock in Šakiai

Product information

Unbreakable folding brake handle, marked in the name as right. The photo marks two figures: 160 mm across the whole assembly and "D 8" at the round holder bore.

  • The 160 mm arrow rests against the left edge of the holder and against the lever's ball end — this is the full length, not just of one lever
  • The "D 8" arrow rests against the large round bore in the holder ITSELF, not the clamp. The handlebar clamp is not visible at all on this listing: there is one photo and it shows only one side
  • So we do not state the handlebar diameter for this product — it is not marked in the photo. The other half of the pair ("left") is marked "D 22", but we cannot carry that figure over here
  • The photo shows a folding hinge with a silver bolt and an adjusting bolt with a lock nut
  • The other half of the pair is a separate product — "Unbreakable folding handle left". Do not compare the figures directly: here, 160 mm measures the whole part, while there 142 mm measures only up to the rear corner of the housing
  • A cable handle and a hydraulic one look alike from the outside but differ inside: a steel cable hooks onto the cable version, a hose screws onto the hydraulic one. Check what comes off your old one
  • Time to replace it when the lever is bent, when the pivot pin is loose, or when the clamp ear is cracked at the bolt
  • Some brake handles in the shop sit not in this category but in "Levers / Knobs" — if you do not find a match here, open that category in the catalogue
  • This category holds different products: single handles, pairs of them, switch assemblies and master cylinders. This is not one set

To be straight with you: the handlebar clamp did not make it into the photo, so we do not state its bore diameter, even though it is marked on the paired listing. Which specific model and which years this product fits, the maker did not state, and we do not guess — but we can compare dimensions: write us your model and year. Before ordering, measure your handlebar diameter at the clamp and the lever length from the pivot to the tip — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56

VIEW ALL