ATV right brake lever, with 2 cable connections

ATV right brake lever, marked in the name with the words "with 2 cable connections". The photo has not a single dimension – no arrows, no numbers – so we describe only what is visible in the photo: a black lever with a ball at the end, a housing with a shiny light-metal pin on top, and a split clamp with a hex bolt.

• This card has four photo files, but all four are byte-for-byte identical – there is really only one photo. It has no dimensions: there is not a single arrow of the kind used in this category to mark dimensions – neither coloured nor black – and there is no ruler or object placed for comparison either
• The clamp bore is the first number that needs to match: a clamp that does not fit the handlebar either fails to tighten or does not go on at all. That is exactly what is missing here – on neighbouring cards in this category it is marked in the photo (22.25 mm at "Mini ATV brake lever LEFT" and 22.50 mm at "Mini ATV brake lever RIGHT"), but not on this one
• Visible in the photo: a lever with a ball at the end, a boss with a shiny pin with a round head, below it a cross-head screw, and at the end – a split clamp, with its bolt's hex head visible underneath
• The cable connection points are not shown in the photo: it was shot from one side only, and they are not on that side. That there are two connection points is stated only in the name – the photo neither confirms nor denies it
• In the supplier's data the same item is described as a lever "with a double cable-connection mechanism", while the name says "with 2 cable connections". Whether this is the same thing, the maker did not explain – we are asking them
• Supplier code WI ZQ56301 – state it again when ordering
• It is time to replace it when the lever is bent, when the axle is loose, or when the clamp's lug is cracked at the bolt
• Which card is the left-hand side of this pair, the maker did not state, and we do not guess it. Four cards in this category are for the left-hand side – write us your model, and we will check
• Some brake levers in the shop are listed not in this category, but in the "Levers / Knobs" category – if you do not find a suitable one here, open that one in the catalogue
• This category holds different items: individual levers, pairs of them, switch assemblies, and master cylinders. This is not one kit

To be straight with you: not a single dimension – neither the clamp bore, nor the lever length, nor the overall height – was marked by the maker for this item, and none are in the photo either. Which specific model and which years this lever fits, the maker did not state, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, measure your handlebar's diameter at the clamp point and photograph the old assembly from several sides so the cable positions are visible – send us the photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56