Cable lug 6,3mm

Cable lug, the name states 6,3 mm: the drawing shows a flat lug with yellow insulation, and only the letters A and B are marked at the dimensions — there are no numbers next to them. Measure the width of your old lug before ordering.

• The flat lug is crimped onto the end of the wire and slides onto a spade terminal — this way the wire disconnects and connects without a soldering iron
• In the drawing, the letter A shows the height of the lug's opening, letter B its thickness; both dimensions are marked, but the maker wrote no number next to either
• So the only number on this card is the 6,3 mm in the name; the drawing neither confirms nor contradicts it
• The insulation is yellow, covering the lug all the way round, with a wider sleeve on the wire side
• The lug is shown in the drawing from the side and from the end; the end view shows it is bent from a single sheet
• The photo gives no wire cross-section, no lug length and no material
• Supplier code Lemona co/st-281 — state it again when you order

To be straight with you: which wire cross-section this yellow insulation is meant for is not written on the drawing, so we do not invent a number; nor do we say whether 6,3 mm is the width of the opening or the width of the whole lug — the drawing's letters do not tell us that. Before ordering, measure the width of your spade terminal and your wire's cross-section, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56