Hydraulic brake bolt washer with gasket

Hydraulic brake bolt washer with gasket – a sealing ring; one banjo eye needs two such rings: one goes under the eye, the other above it. The photo shows a thick dark ring with a clearly visible inner edge.

• One eye needs two such washers: one between the caliper and the eye, the other between the eye and the bolt head
• The washer is a single-use part: once the bolt is unscrewed, the old one is already compressed and no longer restores the seal
• No dimension is marked on this item in the photo – no bore, no outer diameter, no thickness. So we write no numbers here and ask you to compare with your old one
• The bolts it goes with are in this same category: "Hydraulic brake bolt M10x1,00" and "…M10x1,25"
• In the supplier's data this washer and the bolt "M10x1,00 with bleed point" have been given the same code, although they are different parts. We do not give the code as an ordering key
• After reconnecting a hose the system must be bled and topped up with fluid – the kind your master cylinder cap specifies; brake fluid is sold separately, in the category "Oils & care"
• This category holds two kinds of items: the hoses themselves and their connecting parts – the three-way fitting, bolts and washer. They are not one set but separate items

To be straight with you: the maker marked neither the diameter nor the thickness on this item. The maker did not state which machine and which years this item is for, and we do not guess – but we can compare the dimensions for you: write us your model and year. Before ordering, unscrew your old bolt and measure the thread diameter and pitch – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56