Skip to content
CUSTOMER SUPPORT: +370 685 777 56
Hydraulic brake bolt M10x1,25 with bleed point - Image 1
Brake hoses

Hydraulic brake bolt M10x1,25 with bleed point

Article no. 62597
€6.50
Prices incl. VAT
In stock — Šakiai

Order by 16:00 — Omniva ships today

1
Not sure it fits your bike? Ask our mechanics or see our fitment-by-VIN FAQ
Same-day dispatch — order by 16:00
24-month guarantee
14-day returns
In stock in Šakiai

Product information

Hydraulic brake bolt M10x1,25 with a bleed point – a banjo bolt with a separate bleed nipple screwed into the head. The thread is marked in the supplier's designation: M10 with a 1,25 mm pitch.

  • The photo shows a zinc-plated bolt with a cross hole in the shank, a hex head, a lock nut and a screwed-in bleed nipple with a hole at its cone end
  • A bleed point is needed where the caliper has none of its own: you bleed the air through the banjo bolt itself
  • This photo is SHARED by four items in this category, and this card has no photo of its own. So we describe only what the photo shows, and which of the four items is pictured, the maker did not mark
  • The thread pitch is the number that decides: M10x1,00 and M10x1,25 differ by a quarter of a millimetre and one will not go in place of the other. Unscrew your old bolt and compare
  • The same bolt with a 1,00 mm pitch is a separate item – "Hydraulic brake bolt M10x1,00 with bleed point"
  • In the supplier's data this item and the bolt "for 2 pipes" have been given the same code, although they are different parts. We do not give the code as an ordering key
  • Two sealing washers are needed with the bolt – they are in this same category
  • After reconnecting a hose the system must be bled and topped up with fluid – the kind your master cylinder cap specifies; brake fluid is sold separately, in the category "Oils & care"
  • This category holds two kinds of items: the hoses themselves and their connecting parts – the three-way fitting, bolts and washer. They are not one set but separate items

To be straight with you: the photo is shared by four items, and the maker did not mark the thread of the bleed nipple. The maker did not state which machine and which years this item is for, and we do not guess – but we can compare the dimensions for you: write us your model and year. Before ordering, unscrew your old bolt and measure the thread diameter and pitch – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56

VIEW ALL