Hydraulic brake bolt M10x1,25

Hydraulic brake bolt M10x1.25 — a banjo bolt with a cross hole drilled in the shank for the fluid. The thread is in the name: M10 with a 1.25 mm pitch.

• The thread pitch is the figure that decides: M10x1.00 and M10x1.25 differ by a quarter of a millimetre and will not go in each other's place. Unscrew your old bolt and compare
• Its own photo shows a dark bolt with a hexagon head and a cross drilling in the shank
• The second photo on this page is SHARED by four products: it shows a zinc-plated bolt with a bleed point screwed into it, which matches the products "…with bleed point". We do not describe the look from it
• The only difference from the neighbouring page is the pitch: 1.25 mm against 1.00 mm. A quarter of a millimetre, and one cannot be screwed in place of the other
• In the supplier's data this product, the M10x1.00 bolt and one more hose are all given THE SAME code — a pitch cannot be ordered by it, so we do not print the code
• Every bolt needs two sealing washers — they are in this same category
• Once the hose has been reconnected, the system has to be bled and topped up with fluid — the one named on the cap of your master cylinder; brake fluid is sold separately, in the "Oils & care" category
• This category holds two kinds of product: the hoses themselves and the parts that join them — a T-piece, bolts and a washer. It is not one kit but separate products

To be straight with you: the length of the bolt and the spanner size of the head the maker did not state. Which machine and which years this product is for, the maker did not state, and we do not guess — but matching dimensions is something we can do: write us your model and year. Before ordering, unscrew your old bolt and measure the thread diameter and the pitch — or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56