Hydraulic brake bolt M10x1,00

Hydraulic brake bolt M10x1,00 – a banjo bolt with a cross-drilled hole in its shank for the fluid. The thread is marked in the name: M10 with a 1,00 mm pitch.

• The thread pitch is the number that decides it: M10x1,00 and M10x1,25 differ by a quarter of a millimetre, and one does not fit where the other belongs. Unscrew your old bolt and compare.
• Its own photo shows a plain dark bolt with a hex head and one cross-drilled hole.
• The card's second photo is SHARED by four items: it shows a zinc-plated bolt with a bleed nipple screwed in, which matches the "…with bleed nipple" items, not this one. We do not describe the appearance from it.
• This category also has the same bolt with a bleed nipple — "Hydraulic brake bolt M10x1,00 with bleed nipple".
• In the supplier's data, this item, the M10x1,25 bolt and one more hose are given the SAME code. You cannot order by thread pitch from it, so we do not give the code — go by the name.
• Each bolt needs two sealing washers — they are in this same category.
• After changing the hose, the system needs bleeding of air and topping up with fluid — whichever type your master cylinder's cap specifies; brake fluid is sold separately, in the "Oils & care" category.
• This category holds two kinds of items: the hoses themselves and their connecting parts — a T-piece, bolts and a washer. This is not one kit, but separate items.

To be straight with you: the maker did not give the bolt's length or the head's wrench size — the name has only the thread. Which exact machine and which years this item is for, the maker did not state, and we do not guess — but we can compare dimensions: write us your model and year. Before ordering, unscrew your old bolt and measure the thread diameter and pitch — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56