Hydraulic brake bolt for 2 pipes

Hydraulic brake bolt for 2 pipes. The photo shows that the shank of the bolt has TWO cross holes at different heights – because of them, two hoses can be connected to a single port.

• Hex head with a flange, the surface is dark, oxidised – that is how it looks in the photo
• The second item in the same series is a plain single-hose bolt: in the list it is marked "Hydraulic brake bolt M10x1,00" or "…M10x1,25"
• The maker did not state the thread diameter and pitch for THIS item – they are in neither the supplier's designation nor the photo
• The thread pitch is the number that decides: M10x1,00 and M10x1,25 differ by a quarter of a millimetre and one will not go in place of the other. Unscrew your old bolt and compare
• Each banjo eye needs two sealing washers: in the list they are marked "Hydraulic brake bolt washer with gasket"
• In the supplier's data this item and the bolt "M10x1,25 with bleed point" have been given the same code, although they are different parts. We do not give the code as an ordering key
• After reconnecting a hose the system must be bled and topped up with fluid – the kind your master cylinder cap specifies; brake fluid is sold separately, in the category "Oils & care"
• This category holds two kinds of items: the hoses themselves and their connecting parts – the three-way fitting, bolts and washer. They are not one set but separate items

To be straight with you: the maker did not state the thread dimensions for this bolt, and the photo does not mark them. The maker did not state which machine and which years this item is for, and we do not guess – but we can compare the dimensions for you: write us your model and year. Before ordering, unscrew your old bolt and measure the thread diameter and pitch – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56