Hydraulic brake pipe (hose) 1200mm

Hydraulic brake hose, marked 1200 mm in the name. The sleeve is black rubber, part of it wrapped in a spring guard, and at both ends – dark, bronze-toned metal eyes.

• This is the only item in this category where BOTH diameters can be read. Printed on the sleeve: “SJZnk Ø7.5mm × Ø3.2mm OD HL” – outer 7,5 mm, inner 3,2 mm
• On the second line of the same sleeve: “CCC GB16897-2010 DOT SAE J1401 2013”. This is the marking and year the factory printed, not our conclusion
• How we measure the length: in the photo the arrows rest on the ends of the crimp ferrules, not on the edges of the eyes. With the eyes the item is longer, so measure your old hose the same way – from ferrule to ferrule
• The photo has no length callout – we rely on the name and ask you to measure your old hose
• Each end fitting needs a bolt and two sealing washers – they are in this same category. The bolts differ by thread pitch: M10x1,00 and M10x1,25. Each pitch comes both as a plain bolt and as the same bolt with a bleed nipple. Choose the plain one if your caliper already has its own bleed nipple
• The hose is replaced not by a wear number, but when it bulges under lever pressure, when fluid seeps out through the ferrule, or when the lever stays soft even after bleeding
• The other end of the hose goes to the caliper; the caliper itself is a separate item, listed as “Disc brake cylinder (caliper)”
• After fitting the hose, the system needs bleeding of air and topping up with fluid – the type your master cylinder cap specifies; brake fluid is sold separately, in the “Oils & care” category
• This category holds two kinds of items: the hoses themselves and their connecting parts – the three-way fitting, bolts and washer. These are not one kit, but separate items
• Supplier code WI ZQ41361 – quote it again when ordering

To be straight with you: the maker did not mark the eye’s bore diameter on this item. For which specific machine and which year this item is meant, the maker did not state, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, straighten out your old hose and measure it from ferrule to ferrule, and compare the end fittings with the photo – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56