Gearbox with fork A variant

Gearbox with fork, A variant — two shafts, each with four gears, and a drum with a fork: in the drawing, the shafts are 116,5 mm and 119 mm, the drum is 95 mm. Compare with your old parts before ordering.

• The gears on the shafts transmit rotation, and the fork, when shifting gear, pushes the required gear into a different position.
• On the 116,5 mm shaft, the tooth counts marked next to the gears are 36T, 31T, 27T and 24T; next to each is a number with the letter C: 66,5 mm, 57 mm, 49 mm and 45 mm.
• On the 119 mm shaft — 11T, 16T, 20T and 23T, next to them C 24 mm, C 33 mm, C 40 mm and C 46 mm; what the letter C means is not explained in the drawing.
• The splined ends of both shafts are marked 17 mm and 6T; across the other ends — 13,5 mm (on the 116,5 mm shaft) and 14 mm (on the 119 mm shaft).
• The drum is 95 mm long, across its ends — 13 mm and 34 mm; two long flat fork legs point downward.
• This card's drawing is the same photo as the card "Gearbox kit with fork ATV110/125 B" — only one number differs: here it's 13,5 mm, there it's 12 mm.

To be straight with you: both cards' drawings are made from the same photo, so the frame tells the A variant from the B one only by 13,5 mm versus 12 mm, not by appearance. Which engine or ATV the A variant is meant for is not given in the name. Before ordering, measure the diameters of your shaft ends and count the gear teeth, send us a photo of the old parts — we'll check before you order.

24-month warranty · tel. +370 685 777 56