Piston with rings 62,00 pin 13mm

Piston with rings, 62,00 mm diameter, 13 mm pin. Both numbers are taken from the name – the photo has not a single dimension on it.

• A piston with rings is replaced together with the cylinder or after it is bored: once worn, it loses its seal, compression drops, a cold engine develops a rattle and oil consumption rises
• The photo shows a set: piston, pin, five rings – including one toothed expander – and two circlips
• The photo on this card is shared with the product "Piston with rings 56,50, pin 13mm" – so we do not judge the size from it
• The photo itself has no scale: no ruler, no object placed for comparison. Only the numbers written in the captions give the size, so measure your own cylinder bore
• If the piston is still sound but compression is dropping, the rings alone may be enough: rings of the same 62,00 mm diameter are listed as a separate item – "Piston rings 4T 62,00mm"
• You can tell a worn piston by a scuffed side, too much play in the rings and imprinted marks at the pin bore; the rings are always replaced together with the piston

To be straight with you: which exact model and which years it fits, the maker did not write, and we do not guess – write us your model and year. Before ordering, measure your cylinder bore and the old pin's diameter – or send a photo with calipers: we will check it before you order.

24-month warranty · tel. +370 685 777 56