ATV110 left side cover part front low for 6-pole windings (starter at the bottom)

ATV110 left side cover part, front low, for 6-pole windings – a light silver part with a central bore showing an internal thread: in the drawing, 129 mm, 129 mm, 115 mm, 40 mm and Ø 25. Compare with your old part before ordering.

• By the name, this is the front lower part of the left cover for an ATV110 engine with 6-pole windings, where the starter sits at the bottom; the windings are not in the photo – only the cover.
• Both 129 mm measurements are marked between the mounting holes: the first between the left and the top one, the second between the top and the right one. The arrows are drawn horizontally, but the two "129 mm" arrows in the photo are not the same length, so we do not state whether this is the straight-line distance between the holes or the horizontal one.
• 115 mm is marked between the left and the bottom hole; that arrow is also drawn horizontally.
• 40 mm is marked between two small holes on the central boss flange, and the Ø 25 arrow points to the central bore; there is no unit next to Ø 25.
• On the outside there are four mounting holes visible, a cylindrical boss at the top right and a round boss on the right.
• The photo gives no cover depth and no thread pitch.

To be straight with you: "6-pole" and "starter at the bottom" are words from the name: the photo shows only the cover, so you can only verify them against your own engine. Before ordering, measure the distances between your cover's holes, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56