Motor winding cover ATV110/125

Motor windings cover ATV110/125 – the photo shows two screw-in plugs with a slot for a screwdriver: the smaller one is marked 21,60 mm across the head and 13,25 mm across the threaded part, the larger one – 37,75 mm and 29,50 mm. Compare with your old plugs before ordering.

• The screw-in plug closes an opening in the engine cover so dirt and water do not get inside; unscrewing it gives access to what is underneath.
• The 21,60 mm and 37,75 mm lines rest on the edges of the heads, the 13,25 mm and 29,50 mm lines – on the sides of the threaded part.
• The heads of both plugs are glossy and domed, with a cross slot.
• From underneath both plugs are hollow: the smaller one's threaded part is tube-shaped, the larger one's – cup-shaped.
• The name mentions one cover, while the photos show two plugs of different sizes; how many are in the set, the photo does not answer.
• The photo shows neither the thread pitch nor the gaskets.

To be straight with you: the name mentions one cover, while the photos show two plugs, and we will not decide for the supplier which source is right. Before ordering, measure the thread diameter of your plugs, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56