ATV110/125 left side cover part front for 6-pole windings B

ATV110/125 left side cover front part for 6-pole windings B – a silver-coloured cover with an oval pad, four holes and a Ø 28 mm bore: in the drawing 220 mm wide and 145 mm high. Compare with your old part before ordering.

• Going by the name, this is the front part of the left cover, variant B, for an ATV110/125 engine with 6-pole windings; the windings are not in the photo.
• On the oval pad – four holes: 30 mm is marked between the upper ones, 52 mm – vertically between the right-hand ones; the auxiliary lines for both dimensions touch the outer edges of the holes, so we do not write whether this is the gap between the centres or between the edges. The Ø 28 mm arrows rest on the edges of the centre bore.
• 220 mm – across the full width, from the left to the right lug edge; 145 mm in the inset drawing – from the top to the bottom edge.
• In the inset drawing, 92 mm and 31 mm are marked between two holes on the left side, 126 mm and 97 mm – between the right-hand and the lower-left hole; the ends of these lines rest on the outer edges of the holes, not on the centres.
• In the side view, 90 mm is marked from the raised top to the opposite edge, and Ø 12 mm is a bore in the side boss.
• The photo shows neither a gasket nor bolts.

To be straight with you: whether variant B fits your engine is decided by the hole positions, not the letter in the name, so we rely only on the drawing's figures. Before ordering, measure the distances between the holes on your cover, send us a photo of the old part — we will check it before you order.

24-month warranty · tel. +370 685 777 56