Mini ATV electric throttle handle complete with information panel

Mini ATV electric throttle handle with an information panel: the photo shows the charge gauge on the body of the handle itself.

• To be straight with you: the maker did not write a single dimension on the photos of this page. What we write is what can be seen in them
• The second photo shows the panel close up: in a chrome field there is a scale marked from FULL to EMPTY with coloured squares. This is the battery charge gauge
• The photo shows a pair of grips: one with the body and the panel, the other plain, plus a long lead with a connector
• The neighbouring page in this row has no such panel, and its photo marks the dimensions 142.50 mm, 119 mm and 36 mm. On this one there are none
• An electric throttle pulls no cable — a voltage is changed instead: a Hall sensor sits inside, and the controller gives power on its signal. So what matters is not the cable lug but the number of wires and the type of connector
• The first size to match is the diameter of the bar tube where the clamp sits: bars too wide will not go into the body, bars too narrow will let the body turn
• The throttle must spring back on its own when you let go. If it stays turned with nothing pressing it, either the drum is dirty or the clamp is done up too tight
• Time to replace it when the body is cracked at the screw, when the drum is worn or when the throttle no longer returns by itself

To be straight with you: neither the length of the grips nor the bar hole was given by the maker for this page. Which exact model and which years this product is for, the maker did not say, and we do not guess — but matching dimensions is something we can do: write us your model and year. Before ordering, measure the diameter of your bars where the clamp sits and photograph the lug on your old cable, or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56