Piston SUZUKI KATANA - 47,00 SEE TW

Piston for a SUZUKI KATANA engine, 47,00 mm diameter. This is the only listing in this series with a real, already used part photographed.

• The piston with rings is replaced together with the cylinder or after it has been rebored: worn, it loses its seal, compression drops, a rattle appears in a cold engine, and oil consumption rises
• What "SEE TW" at the end of the name means, the manufacturer did not write, and we do not guess — the same marker appears on other items in this listing too
• The first photo shows a piston with discolouration and a pit on the side, a pin, one circlip and two compression rings — this is not a studio photo
• The second and third photos mark: diameter 47 mm, overall height 53 mm, pin bore 12 mm and pin length 37 mm
• 53 mm is the tallest in this listing among the 47,00 mm pistons: the other five are marked 40, 44, 49, 49 and 51 mm
• The photo itself has no scale: no ruler, no object placed for comparison. Only the numbers written in the callouts give the size, so measure your own cylinder bore
• If the piston is still sound and compression is dropping, just the rings might be enough: rings of the same 47,00 mm diameter are in the listing — "Piston ring set GY6 4T 80cc 47,00mm" — but that is a set from a different, GY6 4T line; whether it fits your engine, the manufacturer did not write — write us your model, we will check
• You will recognise a worn piston by a rubbed-out side, too large a gap in the rings, and impressed marks at the pin bore; the rings are always replaced together with the piston

To be straight with you: the first photo shows a used part with discolouration; whether it arrives just like that is not visible from the data we have. Which exact model and which years it fits, the manufacturer did not write, and we do not guess — write us your model and year. Before ordering, measure your cylinder bore and the old pin diameter — or send a photo with a caliper: we will check before you order.

24-month warranty · tel. +370 685 777 56