Piston SUZUKI AD 70 - 47,00 SEE TW

Piston SUZUKI AD 70 for the engine, 47,00 mm diameter. The photo marks four dimensions, and when choosing, the first two are the diameter and the gudgeon-pin bore.

• The piston with rings is replaced together with the cylinder or after it is bored: once worn, it loses its seal, compression drops, a rattle appears in a cold engine, and oil consumption rises.
• What "SEE TW" at the end of the name means, the maker did not write, and we do not guess — the same marker appears on other items in this listing.
• The photo marks: diameter 47 mm, from the crown to the pin axis 16 mm, pin diameter 10 mm, pin length 38 mm.
• The maker did not mark the overall height in the photo — measure your old part.
• The photo shows a set: piston, gudgeon pin, two compression rings, one thin ring and two circlips.
• The photo itself has no scale: no ruler, no object placed for comparison. Only the numbers written in the callouts give the size, so measure your own cylinder bore.
• If the piston is still sound but compression is dropping, rings alone may be enough: rings of the same 47,00 mm diameter are in the listing — "Piston ring set GY6 4T 80cc 47,00mm" — but that is a set from a different, GY6 4T line; whether it fits your engine, the maker did not write — write us your model, we will check.
• You will recognise a worn piston by a rubbed-through side, too large a gap in the rings, and pressed-in marks around the pin bore; the rings are always replaced together with the piston.
• Supplier code MC 02724 – state it again when ordering.

To be straight with you: which specific model and which years it fits, the maker did not write, and we do not guess — write us your model and year. Before ordering, measure your cylinder bore and your old pin diameter — or send a photo with a calliper: we will check it before you order.

24-month warranty · tel. +370 685 777 56