Piston with rings 71,00mm

Piston with rings, 71,00 mm in diameter. When choosing, the two most important numbers are the cylinder bore and the pin diameter – 15 mm.

• The piston with rings is replaced together with the cylinder or after it is bored: worn out, it loses sealing, compression drops, the cold engine starts rattling and oil consumption rises
• The photo marks: diameter 71 mm, crown-to-pin-axis distance 16 mm, overall height 48 mm, pin diameter 15 mm, pin length 59 mm
• The photo shows the set: piston, pin, five rings – one of them a notched expander – and two circlips
• The photo itself carries no scale: no ruler, no object placed for comparison. Only the numbers listed in the captions state the size, so measure your own cylinder bore
• If the piston is still sound but compression is dropping, rings alone may be enough – but there are no separate 71,00 mm rings in our range; write us your model and cylinder bore, and we will tell you what we have
• You will recognise a worn piston by a worn-through side, too large a gap in the rings and impression marks near the pin bore; the rings are always replaced together with the piston
• Supplier code WI ZRT0022 – state it again when ordering

To be straight with you: the maker did not write which specific model and year it is for, and we do not guess – write us your model and year. Before ordering, measure your cylinder bore and the old pin diameter yourself – or send a photo with a caliper: we will check it before you order.

24-month warranty · tel. +370 685 777 56