Piston with rings 56,00 pin 13mm

Piston with rings, 56,00 mm diameter, 13 mm pin. The photo marks three dimensions, and for fitment the first one is the cylinder bore.

• A piston with rings is replaced together with the cylinder or after it is honed: once worn it loses its seal, compression drops, a cold engine develops a knock and oil consumption rises
• The photo marks: diameter 56 mm, overall height 46 mm and pin bore Ø 13 mm
• The maker did not mark the distance from the crown to the pin axis or the pin length in the photo – measure your old part
• The photo on this card and the photo of the neighbouring product "Piston with rings 56,50 pin 13mm" are the same image with the diameter number overwritten; the height 46 mm and the pin Ø 13 mm there are the same, only the bore differs
• The photo itself has no scale – no ruler and no object placed for comparison. Only the numbers written in the captions give the size, so measure your own cylinder bore
• If the piston is still sound and compression is dropping, rings alone may be enough – but separate 56,00 mm rings are not in the list; write us your model and cylinder bore, and we will say what we have
• A worn piston is recognised by a worn-smooth side, excessive ring clearance and pressed-in marks around the pin bore; the rings are always replaced together with the piston
• Supplier code WI PTB0022 – quote it again when ordering

To be straight with you: which specific model and which years it is for, the maker did not write, and we do not guess – write us your model and year. Before ordering, measure your cylinder bore and your old pin diameter – or send us a photo with a caliper: we will check it before you order.

24-month warranty · tel. +370 685 777 56