Piston with rings 54,00 pin 14mm

Piston with rings, 54,00 mm diameter, 14 mm gudgeon pin. The second photo has a diagram, and in it the same two numbers are marked with the letters D and d.

• A piston with rings is replaced together with the cylinder or after it is bored: worn out, it loses its seal, compression drops, a rattle appears in a cold engine and oil consumption rises
• The second photo — a diagram with letters and their values: D – 54 mm, d – 14 mm, L – 39 mm, C – 18 mm, H – 3 mm; what L, C and H mean, the maker did not write, so we do not assign them a meaning
• The photo shows the set: piston, gudgeon pin, five rings – among them one toothed expander – and two circlips
• Neighbouring by diameter in the list are "Piston with rings 53,00mm" and "Piston with rings 56,00 pin 13mm" – 53,00 mm and 56,00 mm
• The photo itself has no scale: no ruler, no object placed beside it for comparison. Only the numbers written in the callouts give the size, so measure your cylinder's bore
• If the piston is still sound but compression is dropping, rings alone may be enough – but separate 54,00 mm rings are not in the list; write us your model and cylinder bore, we will tell you what we have
• You will recognise a worn piston by a rubbed-out side, too large a gap in the rings, and imprinted marks around the gudgeon pin bore; the rings are always replaced together with the piston
• Supplier code WI AY35349 AT 125QE0706C – quote it again when ordering

To be straight with you: which specific model and which year it is for, the maker did not write, and we do not guess – write us your model and year. Before ordering, measure your cylinder's bore and the old gudgeon pin's diameter – or send a photo with a caliper: we will check it before you order.

24-month warranty · tel. +370 685 777 56