Brake pads 225100310

Disc brake pad, marked by the maker with number 225100310. The diagram gives: width 51,5 mm, height 53,5 mm, total thickness 9,5 mm.

• The diagram's three main numbers mean this: width is measured across the bottom edge, height in the side view, and thickness is total: friction material together with the metal backing
• At the top – a square hole in the rectangular tab; the friction material is split by one groove
• The neighbouring listing 225100280 has the same square tab, but is narrower and thinner: 46 mm against 51,5 mm and 6,4 mm against 9,5 mm. The height of both is nearly the same – 53 mm and 53,5 mm
• The maker wrote the thickness figure on the diagram with a dot (9.5), while the height in the same spot on the diagram – with a comma (53,5). That is an inconsistency within the same diagram, not two different dimensions
• When ordering, give the maker's number 225100310 from the name – it is what tells this item apart from the neighbouring listings
• The photo itself has no scale: no ruler, no object placed for comparison. Only the numbers written on the diagram give the size, so measure your old pad
• It is time to replace it when the layer of friction material wears down to the metal backing, or when it is scorched and shiny: then the brake squeals, and the lever goes almost all the way to the handlebar
• The pad is pressed against the disc by the caliper piston; if yours is leaking or seized, the pad alone will not solve the problem. The caliper itself is a separate item, listed as "Disc brake cylinder (caliper)"
• How many pads you get, the maker did not write next to the item. A caliper always needs a pair, so check with us before ordering – we will answer
• Supplier code MC 04146 – give it again when ordering

To be straight with you: the maker did not mark the side length of the square hole – the three dimensions marked are 51,5 mm, 53,5 mm and 9.5 mm. Compare the hole by holding your old pad against it. Which specific model and which years these pads are for, the maker did not state, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, take out the old pad and measure its width, height and thickness with calipers, and if it has ears – also the distance between the centres of their holes; or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56