Brake pads 225100080

Disc brake pad, marked by the maker with the number 225100080. The diagram lists four dimensions: width 36 mm, height 45 mm, total thickness 6 mm, and the distance between the ear-hole centres 25 mm.

• In the diagram the three main numbers mean this: width is measured across the bottom edge, height in the side view, and thickness is the total — friction material together with the metal backing plate
• The fourth number shows the distance between the CENTRES of the ear holes, not between their edges — in the diagram the arrows rest exactly on the holes' midlines
• The photo shows the pad from both sides: on the metal backing plate there are four round recesses arranged in a square
• The diagram and the photo do not match everywhere: in the diagram the ear holes are round, while in the photo they are elongated, and the bottom corners are cut off in the photo but rounded in the diagram. Which source shows this exact item, the maker did not explain — measure your old pad, do not trust the photo
• In the supplier's data, this listing and "Brake pads 225100070" are marked with the same code, even though their dimensions differ: 36 × 45 × 6 mm against 32 × 57,5 × 5,5 mm. So we do not give the code as the ordering key here — use the number 225100080
• The photo itself has no scale: no ruler, no object placed beside it for comparison. Size is given only by the numbers written in the diagram, so measure your old pad
• Time to replace it when the friction-material layer wears down to the metal backing plate or when it is scorched and shiny: then the brake squeals and the lever pulls almost to the handlebar
• The pad is pressed against the disc by the caliper piston; if yours is leaking or seized, a new pad alone will not fix the problem. The caliper itself is a separate item, listed as "Disc brake cylinder (caliper)"
• How many pads you get, the maker did not write next to the item. A caliper always needs a pair, so check with us before ordering — we will answer

To be straight with you: the maker did not state either the friction-material type or the ear-hole diameter for this item. The maker did not specify which exact model and year these pads are for, and we do not guess — but we can compare the measurements for you: write us your model and year. Before ordering, take out your old pad and use calipers to measure its width, height and thickness, and if it has ears, also measure the distance between their hole centres; or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56