Brake pads 225100580

Disc brake pads, marked by the maker with number 225100580. The drawing shows two: one with a hook, 97 mm wide, the other without it – 77,5 mm.

• Both are 42 mm high, with a combined thickness of 9,2 mm
• In the drawing the three main numbers mean this: the width is measured across the bottom edge, the height in the side view, and the thickness is the total – the friction material together with the metal backing plate
• The listing has a card with EXACTLY the same four numbers – 225100350 "with hook". Laying one drawing over the other shows that the pad outlines are mirror images of each other: the same shape, just flipped. Here the hook is drawn on the left, on 225100350 – on the right, so the two will not fit the same caliper at the same time
• Whether this is a left-and-right pair, the maker did not mark. So choose not by the frame, but by holding your old pad against it: line up the hook side and the position of the holes
• A third card of this shape – 225100360: there the widths are 94,5 mm and 77 mm and the thickness 8 mm, so that is not the same thing
• When ordering, quote the maker's number from the name, 225100580 – we will use it to tell this item apart from the neighbouring cards
• The photo itself has no scale: no ruler, no object placed for comparison. Only the numbers written on the drawing give the size, so measure your old pad
• Time to replace them is when the layer of friction material wears down to the metal backing, or when it is scorched and glazed: then the brake squeals and the lever pulls almost to the handlebar
• The caliper piston presses the pad against the disc; if yours is leaking or seized, the pad alone will not fix the problem. The caliper itself is a separate item, listed as "Disc brake cylinder (caliper)"
• Supplier code WI CSC4105 AW0916 – quote it again when ordering

To be straight with you: this card and 225100350 are indistinguishable by the numbers – only the drawing's side differs. The maker did not state which specific model and year these pads are for, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, remove the old pad and use a caliper gauge to measure its width, height and thickness, and if it has ears – also the distance between their hole centres; or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56