Lock set BT 49 QT 12 and BT 125 QT

Lock set BT 49 QT 12 and BT 125 QT: ignition lock 124 mm high with a Ø 34 mm ring, tank cap Ø 74 mm, two smaller locks, a mounting plate and keys. Compare with your old locks while you still have them.

• The set replaces several locks at once, for example when keys are lost or the cylinders start sticking or are broken
• On the ignition lock's drawings we checked the ends of the lines: Ø 34 mm rests on the edges of the upper black knurled ring, 52 mm – on the outer edges of both flange holes, 124 mm runs from the top of the ring to the bottom of the black housing, and 94 mm – from the end of the yellowish pin protruding from the flange to the opposite side of the body
• The tank cap's Ø 74 mm line runs through the centre, and its arrows rest on the outer edge. On the underside of the cap – a light-coloured plate with three tabs, fastened with two cross-head screws; 65 mm measures across the ends of two opposite tabs
• In the corner of the drawing, a white four-contact plug is shown separately
• The photos do not match. In the second photo – two keys with black heads, a silver cylinder with a white plastic end, a small black lock with a flat tab and a yellow-zinc-plated plate with a large hole. In the first – a differently-looking set: a cap marked LOCK, a cylinder with a blue rim, a curved plate, a black clip and four keys on a ring, two of them with black heads
• The photos give neither the smaller locks' dimensions nor what the wires are for

To be straight with you: the name gives BT 49 QT 12 and BT 125 QT, but without a year or version, and we do not decide from the photos which shape of parts and how many keys will be in the set. Before ordering, measure your ignition lock's flange and the tank cap's diameter, count the plug's contacts, send us a photo of the old locks – we will check it before you order.

24-month warranty · tel. +370 685 777 56