Motorcycle lock set

Motorcycle lock set: ignition lock with a six-pin plug, tank cap Ø 104 mm, three smaller locks, two keys and four screws. Compare with your old locks before ordering.

• A set like this lets you replace several locks at once, when keys are lost or the cylinders are worn
• On the tank cap ring – four hex-socket screws and three empty holes. Ø 104 mm is marked by an arc along the ring's outer edge, the 89 mm arrows rest on the centres of two opposite screws, and the Ø 5,5 mm arrow rests on the top hole. On the cap – a flip-up plate marked PULL
• The ignition lock is black: cylinder Ø 30 mm, 62 mm from its front to the flange, 58 mm between the centres of the two flange holes, the hole itself Ø 6,5 mm. Next to the plug it says "6 pin", showing six contacts in two rows, and around the key slot – three marks
• The lock with the yellowish tongue has two threaded holes, one marked M5, 17 mm between them; the cylinder front is Ø 18,5 mm
• The lock with the chrome ring has two ears with holes, one hole marked M6, 33 mm between the holes, the cylinder front is Ø 21 mm, and the 34 mm line rests on the cylinder front edge and the top of the far ear. The head of the round black lock is Ø 23 mm
• Two keys on a ring, their head visible in black; four more screws are shown separately – apart from the ones fitted into the cap ring
• The photo gives no model marks, no wire purpose and no screw size

We write only what we know. Which motorcycle and which years the set fits is not given in the name, so we do not guess. Before ordering, measure the distance between your tank cap screws and between the ignition lock holes, count the plug contacts, and send us a photo of your old locks – we will check it before you order.

24-month warranty · tel. +370 685 777 56