ATV fork pivot pair

ATV fork pivot pair: marked in the photo: 124 mm overall length, 71 mm height, M16 housing thread and M14 pin.

• The pair has two parts, and their dimensions in the photo nearly match: one has an 86 mm thread section, the other 85 mm. Both have a total length of 124 mm.
• The M16 arrows point to the long thread with a nut, the M14 to the pin with a castellated nut. These are two different threads on one part.
• In the first photo, 14 mm and 16 mm are marked separately, in the second — 19 mm at the pin end.
• The photo shows the set includes two self-locking nuts.
• This listing sits in the “Joints” subcategory, while the related handlebar tie-rod end pairs are in the “Chassis & suspension” section, subcategory “Tie rods”. If you cannot find the right thread here, check those too.
• A ball pivot is chosen by three sizes: the housing diameter, the pin thread and the overall height. If even one does not match, the part will either not press in or will not tighten.
• Time to replace it: when moving the pivot by hand you feel play, when the rubber boot is torn, or when the arm is bent after a fall.
• Supplier code WI ZQ51052 — quote it again when ordering.

To be straight with you: whether one thread in the pair is left-hand, the maker did not mark — both are marked the same. Which specific model and which years this part is meant for, the maker did not specify, and we do not guess — but comparing dimensions is something we can do: write us your model and year. Before ordering, measure the housing diameter and overall height of your old part — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56