Manual motorcycle lift DL3502

Manual motorcycle lift DL3502 – scissor type: red top beam with two supports, black scissors, red base and a sticker reading "MOTORCYCLE LIFT 1100 LBS". Measure your motorcycle's ground clearance before ordering.

• The lift is slid under the motorcycle so the supports end up under the frame, and it is raised by turning the hex shaft end that sticks out at the back of the top beam; the photos show no hydraulic cylinder.
• Both supports are black clamps on the beam, tightened with wing bolts; each has a threaded post with a recessed black pad with a rough surface.
• The base is a red tray with rows of holes on the sides; a pin with a ring is inserted into one hole, and a flat supporting leg with a hole sticks out to the side.
• A galvanised tube with a hex opening is bolted onto the beam, and there is a WARNING sticker on the scissors.
• The sticker reads 1100 LBS, that is 1100 pounds, or about 499 kg; no other lifting-capacity figures appear in the photos.
• Supplier code DL3502 — give it again when you order.
• The photo has no lifting height, no distance between the supports, and no dimensions of the lift itself.

To be straight with you: the maker did not write the kilograms — we converted 1100 pounds to kilograms ourselves, and the lifting height is not stated anywhere. Before ordering, measure the distance from the floor to the underside of your motorcycle's frame and the gap between the spots the supports will rest against, write us your motorcycle's model and weight — we will check it before you order.

24-month warranty · tel. +370 685 777 56