Beam support

Beam support, 14 sizes: width from 45 to 76 mm, length from 93 to 195 mm, for example 51 × 93 or 76 × 182 mm. Measure the beam before ordering.

• The beam support is meant to support and fasten a wooden beam — that is what the name says.
• The photo shows a support bent from sheet metal: two parallel walls with rows of holes, taller and joined at one end, tapering diagonally towards the other end.
• At the bottom the walls are bent outward and form flat strips with small holes and a few larger holes; the surface is silvery grey.
• Width 45 mm — lengths 96, 137, 138 and 168 mm; 51 mm — 93, 105, 135, 164, 165 and 195 mm; 63 mm — 158 mm; 75 mm — 152 mm; 76 mm — 123 and 182 mm.
• There are very close variants: 45 × 137 and 45 × 138, 51 × 164 and 51 × 165, and the width is both 75 and 76 mm; the supplier's data also lists a 153 mm length that is not among the choices.
• Which dimension of the support the supplier calls width and which length is not marked in the photo; there is neither the sheet thickness, nor the material, nor the hole diameters.

To be straight with you: the supplier did not state directly what beam width each size fits, so we do not guess. Before ordering, measure the width and height of the beam, send us a photo of the location — we will check it before you order.

24-month warranty · tel. +370 685 777 56