Impeller for generator 2T 50cc

Generator impeller 2T 50cc for the engine – outer diameter 120 mm, bolt hole spacing 41 mm.

• The impeller spins on the generator and blows air across the cylinder fins: without it the engine overheats within a few minutes at idle
• The plastic impeller ages and becomes brittle – a broken vane unbalances the assembly, causing vibration and whistling
• Two numbers matter when choosing: the outer diameter and the bolt hole spacing. The three impellers in the catalogue differ by exactly these, not by engine displacement
• Do not confuse it with the 4T 50cc impeller: the engine displacement is the same, but that one is smaller – 110 mm versus 120 mm. Choose by diameter, not by displacement
• The bolt hole spacing here is the smallest of the three impellers in the catalogue – 41 mm versus 47 mm and 53 mm

To be straight with you: 120 mm and 41 mm are taken from the photo's captions, not measured by us. Which year's model and which modification it fits, the supplier did not state, and we do not guess – write us your model and year. Send a photo of the old assembly – we will check it before you order.

24-month warranty · tel. +370 685 777 56