Generator windings (stator) ATV200 12 poles D86mm

Generator windings (stator) ATV200 for a quad, 12 poles, plate diameter per the name – 86 mm.

• The stator is the stationary part of the generator: a magnet spins around it, and the windings generate the current that charges the battery and powers the ignition
• You will recognise a burnt-out stator by blackened windings, a burnt smell, a battery that will not charge and a spark that disappears once the engine warms up
• Before replacing it, measure the winding resistance and the insulation resistance to earth: often it is not the stator at fault, but the voltage regulator or oxidised connector contacts
• 12 poles and 86 mm are the only two numbers by which this product differs from the other ATV200 stators in the list; you cannot check them in the photo, because part of the coils is covered by the wiring loom
• The pole count alone is not enough: the plate diameter, the number of wires and the connector type must all match too – compare against your old stator
• The photo shows no scale: there is neither a ruler nor an object placed next to it for comparison
• Supplier code MO 5916312025059 AT CB250-03 – state it again when ordering

To be straight with you: 86 mm is taken from the name, not from the photo – the photo has no dimensions. Which year's model and which modification it is meant for, the supplier did not state, and we do not guess – write us your model and year. Before ordering, measure your stator's plate diameter and count the wires – or send us a photo of the old part: we will check.

24-month warranty · tel. +370 685 777 56