Generator windings (stator) 3KJ motor without high voltage pole

WI AI22525 stator for a 3KJ engine, no high-voltage pole: plate Ø 118 mm, holes on a 103 mm circle, centre bore Ø 20 mm, white three-pin plug.

• The stator is the fixed part of the generator: the magnet spins around it, current builds up in the windings, charges the battery and feeds the ignition
• "Without the high-voltage pole" means the ignition coil is not part of it: the spark is made by a separate unit and this stator only charges
• A burnt stator shows itself by blackened windings, a smell of burning, a battery that will not charge and a spark that dies as the engine warms up
• Before replacing, measure the winding resistance and the insulation resistance to earth: often the fault is the regulator or oxidised connector pins, not the stator
• The number of poles alone is not enough: the plate diameter, the number of leads and the plug type all have to match
• The dimensions are marked on the dimensioned drawing among the photos; the loom ends in a white three-pin connector plus two separate leads with bullet terminals
• Supplier code WI AI22525 — quote it when you reorder

To be straight with you: which model year and which version it is made for, the supplier did not say, and we do not guess — write us your model and year. Measure your own plate diameter and count the leads, or send a photo of the old part: we will check it.

24-month warranty · tel. +370 685 777 56