Magnet (rotor) with one-way bearing-bendex ATV110/125 h38mm

Magnet (rotor) with one-way bearing (bendix) for the ATV110/125 quad, height 38 mm.

• The magnet (rotor) turns together with the crankshaft and its field excites the stator windings; without it, the generator gives no current
• The one-way bearing (bendix) is the starter clutch inside the rotor: it turns the engine while starting and disengages once it starts
• The photo notes: the bearing’s conical bore is 19 mm and the diameter of its boss is 40 mm. These two numbers do not contradict the 38 mm from the name – that is the overall height of the bell
• The mark C100-4D is cast on the rim – compare it with your old rotor
• A rotor is replaced because of weakened magnets, a cracked or loose inner disc, and a worn-out keyway – then ignition timing lags or disappears
• It must be removed with a threaded puller, not a leg-type puller; threaded pullers are sold separately – they are listed both in this category and in the "Tools" category

To be straight with you: the mark C100-4D was read off the photo turned 180° – in the photo it stands upside down. Which model year and which modification it is for, the supplier did not specify, and we do not guess – write us your model and year. Before ordering, measure the outer diameter of your rotor and the shaft bore – or send us a photo of your old rotor: we will check it.

24-month warranty · tel. +370 685 777 56