Cylinder with piston DERBI SENDA EBS 47mm TW

DERBI SENDA cylinder with piston, 47 mm bore. On the side of the body – a spigot for the coolant hose, so this is a liquid-cooled engine cylinder, even though it is not stated in the name.

• The set includes, visibly: the cylinder, the piston, the gudgeon pin, two piston rings, a green cylinder base gasket and a black head gasket
• The photo marks: cylinder bore Ø 47 mm, distance between the stud holes 56 mm
• Coolant spigot: outer diameter Ø 17 mm, inner bore Ø 10 mm – both numbers are marked in the photos
• Side flange: bolts 46 mm apart, flange bore Ø 25 mm. Which side this flange is on, the manufacturer did not mark in the photo
• The photo marks: piston pin bore Ø 12 mm; ring grooves – two
• The pin circlips are not visible in the photo – whether they are included in the set, the manufacturer did not say
• The head itself is not in the set – you fit your own; the head gasket is included
• Wear is visible to the naked eye: longitudinal scratches on the cylinder wall, a polished piston skirt, and a ring that rocks freely in its groove – then the whole group is replaced at once

To be straight with you: what the letters "EBS" mean in the name, the manufacturer did not say, and we do not guess – we are asking them. Which specific DERBI SENDA models and years this cylinder is for is also not written – write us your model and year. Before ordering, remove the spark plug and use a calliper to measure the old cylinder's bore, the pin thickness and the distance between the studs – we will check it before you order.

24-month warranty · tel. +370 685 777 56