Cylinder with piston CG150 air 62,00 13mm

CG150 cylinder with piston for an air-cooled engine, 62,00, pin 13 mm. In the box: the cylinder, the piston, the pin, the circlips, the rings and two gaskets.

• Visible in the kit: the cylinder, the piston, the gudgeon pin, two pin circlips, a four-part ring set with a copper-coloured oil ring, and two gaskets
• The body has cooling fins and no hose spigot at all – air-cooled, as the name says
• The maker's drawing marks the cylinder bore as ⌀ 62 mm – the same number as in the name; the bush on the outside ⌀ 67,5 mm, top face 84 and 87 mm, body height 99 mm, the finned section 69 mm, 63 mm between the two ports, the ports themselves ⌀ 9 mm and ⌀ 7 mm
• The piston in the drawing is 61,5 mm in diameter and 40 mm high, pin bore ⌀ 13 mm; the pin ⌀ 13 mm and 45,5 mm long – the pin thickness matches the name
• The list also has another CG150 62,00 cylinder – there the pin is 15 mm thick and 50 mm long, so measure your pin first
• Wear is visible to the naked eye: longitudinal scoring on the cylinder wall, a polished piston skirt, and a ring that rocks loosely in its groove – then the whole group is replaced at once
• Supplier code MO 5906312707864 – quote it again when ordering

To be straight with you: which specific models and years this cylinder is for, the maker did not state, and we do not guess – write us your machine or send a photo of the old part. Before ordering, remove the spark plug and use callipers to measure your old cylinder's bore, the pin thickness and the distance between the studs – we will check it before you order.

24-month warranty · tel. +370 685 777 56