Cylinder with piston CG 47mm for 80cc air engine

CG cylinder with piston for an air-cooled engine, 47 mm bore, 80 cm³. The main thing here is what you get in the box – not just a cylinder, but the whole piston group with gaskets.

• The kit shows: cylinder, piston, gudgeon pin, two pin circlips, a ring set with an oil ring, and two gaskets – a brownish one for the head and a light-coloured one for the base
• The body has cooling fins, with no hose spigots at all – air-cooled, as the name says
• The maker's drawing marks: cylinder bore 47 mm, body 61 mm at the top and 61 mm at the bottom, height 78 mm, intake flange 31 mm and 42 mm; piston 47 mm diameter and 39 mm height, 12 mm from the top ring to the pin bore; pin 13 mm diameter and 38 mm length
• Shared photo: the first photo is the same file as the 39 mm item's, so we read the kit's contents from it for both, while the dimensions are taken from the separate drawings
• There is also a CG 39 mm 49 cm³ cylinder in the listing – the same body, a different bore and a shorter piston
• Wear is visible to the naked eye: longitudinal scratches on the cylinder wall, a burnished piston skirt, and a ring that wobbles loosely in its groove – then the whole group is replaced at once

To be straight with you: which specific models and years this cylinder is for, the maker did not state, and we do not guess – write us your machine or send a photo of the old part. Before ordering, remove the spark plug and measure the old cylinder's bore, the pin thickness and the distance between the studs with a caliper – we will check it before you order.

24-month warranty · tel. +370 685 777 56