Cylinder with piston ATV110/125 52,4mm aluminium

Cylinder with piston for an ATV110/125, 52.4 mm: the box holds more than the cylinder — piston, pin, two circlips, rings and two valve stem seals.

• The set shows: a black finned cylinder, the piston, the gudgeon pin, two circlips for the pin, a set of rings with a copper-coloured oil ring and two brown rubber valve stem seals
• The seals are a rare thing in this category: not one of the other products in it shows any
• The part lies in a branded black "Moretti" box with a star mark — that is visible in the first photo
• The body has cooling fins and no hose spigot — it is air-cooled
• There is no dimensioned drawing in any of the photos, so 110, 125 and 52.4 mm are taken from the name alone
• Two more cylinders with the same 52.4 mm bore sit in the same category — an ATV one with a 13 mm pin and 79 mm height, and a GY6 4T 125 cm³; what comes with them is different
• Wear can be seen with the naked eye: lengthwise scratches on the cylinder wall, a polished piston skirt, a ring that rocks freely in its groove — then the whole group is replaced at once
• Supplier code MO 5906312696847 — quote it when you reorder
• There are no gaskets in the box; for the ATV110/125 engine the same category holds "Engine cylinder head gasket ATV110/125 53mm" and a whole-engine set "ATV110/125 52mm" — the names say 53 and 52 mm, so measure your own bore before ordering

To be straight with you: the name says "aluminium", but you cannot tell the material of the body from a photo, so we do not claim it. Which exact models and which years this cylinder is for, the maker did not state, and we do not guess — write us your machine or send a photo of the old part. Before ordering, take out the spark plug and measure the bore of your old cylinder with a caliper, along with the thickness of the pin and the stud spacing — we will check it before you order.

24-month warranty · tel. +370 685 777 56