Mini bike engine front sprocket T8F 7T

Front sprocket T8F, 7 teeth, for a mini bike engine, with a shaft – the small sprocket on the engine shaft. It spins fastest of the whole drivetrain and wears out first, so it is replaced together with the chain and the rear sprocket.

• Mark T8F – it must match your chain's mark, otherwise the teeth will not match its pitch
• 7 teeth
• This is the sprocket together with a shaft – in the drawing the overall length is 38,5 mm, with sections of 15,5 mm, 9 mm and 14 mm
• The shaft's sections are Ø 15 mm and Ø 16 mm, with a thread M10x1,5 at the end
• The sprocket's part has six splines, Ø 15/9 mm
• The same category has a 7-tooth sprocket with a 25H mark
• Replace all three parts together – on worn teeth, a new chain wears out fast and stretches again
• You will find other sprockets in the same category, and chains and joining links in the "Chains" category
• Supplier code WI PKB0202 ZC0225 – repeat it when ordering

To be straight with you: before ordering, copy the mark off your chain's side plate, count the teeth on the old sprocket and measure the mounting-hole circle and the centre bore – we will check it before you order.

24-month warranty · tel. +370 685 777 56