XADO 0W-20 SN Drum

A fully synthetic, free-flowing, energy- and resource-saving engine oil. It contains atomic revitalizant. Used in petrol engines of passenger cars. Specially developed for modern (manufactured since 2010) American and Japanese cars for which a low-viscosity oil with the best performance properties is specified.

The oil is designed to lubricate and reliably protect powerful engines, including multi-valve engines, engines with turbocharging, intercooling and direct injection, and engines for which an extended oil change interval is specified.

The oil has been granted an official licence by the American Petroleum Institute (API - American Petroleum Institute).

With its performance (API SN) and energy- and resource-saving (ILSAC GF-5) properties, the oil meets the highest requirements for petrol engine oils.

Additional advantages

• Quickly reaches all engine lubrication points and makes cold starting easier;
• Has temperature stability and provides a reliable protective film for parts under demanding operating conditions and high temperature;
• Thanks to the reduced viscosity at high temperature, corresponding to the SAE 20 grade, it saves up to 3% of lubricants compared with SAE xW-40 oils, and up to 1,5% compared with SAE xW-30 oils;
• Can be used in hybrid cars and in cars running on biofuels containing up to 85% ethanol (B85);
• Keeps the engine clean, protects the engine from rust and corrosion;
• The atomic revitalizant contained in the oil compensates for the ongoing wear of assemblies and engine parts;
• Maintains the engine's operating parameters (compression, power and economy) at the highest level.

Physical and chemical properties

• Density at 20 °C, kg/l 0,844
• Kinematic viscosity at 100 °C, mm2/s 8,5
• Kinematic viscosity at 40 °C, mm2/s 43,6
• Dynamic viscosity at -35 °C, mPa s <6200
• Viscosity index 176
• Flash point, °C 202
• Pour point, °C <-45
• Sulphated ash content, mass % 0,8

Use

• Intended for engines for which API SN (SJ, SL and SM) or ILSAC GF-5 (GF-2, -3, -4) oil is recommended.
• Specially intended for cars that must use oil with a viscosity of SAE 0W-20 (Honda, Acura).
• In accordance with the recommendations of European, American and Japanese car manufacturers, it can be used in engines for which a low-viscosity oil SAE 5W-20, 5W-30 is recommended.

Pack

Drum 60 L XA 20667