Anti-coke

Removal of combustion deposits (coke) from piston rings

• a fast-acting product for removing combustion deposits (coke) from piston rings in petrol and diesel engines
• removes all soot and resinous contaminants from the surfaces of the cylinder-piston group
• there is no need to change the engine oil after use.

Use:

Step 1: Warm up the engine. The engine should be warm, but not hot.
Step 2: Unscrew the spark plugs. Disconnect the ignition distributor sensor, the Hall sensor or the commutator.
Step 3: Squeeze the contents of 1 tube into each cylinder in turn. Screw the spark plugs back in. Wait 10-20 min. Unscrew the spark plugs. Cover the spark plug holes with absorbent cloth so that the dirt flying out does not get onto the paint. Crank the engine with the starter for a few seconds.
Step 4: Put the spark plugs back in place.
Step 5: Start the engine and let the crankshaft run at increased speed for up to 15 min. During that time the dissolved coke residues will be removed through the exhaust gas system.

Dosage:

1 tube — 1 cylinder.

Notes:

• avoid getting the product on lacquer and paint coatings;
• safe for catalytic converters, oxygen sensors, technical rubber products and seals.

Can be used to flush the engine lubrication system:

• Squeeze the product into the oil filler opening of a warmed-up engine, using 40 ml of product per 3-5 litres of oil.
• Let the engine idle for 10-15 min.
• Change the oil and the oil filter.

Benefits:

• Restores the mobility of the rings.
• Reduces oil consumption.
• Removes all types of contaminants (soot, coke, lacquers, resins) from the cylinders and pistons, combustion chamber and valves.
• Evens out cylinder compression.
• Reduces the noise of the running engine.
• Removes deposits from the spark plugs.
• Reduces the level of harmful gases emitted into the atmosphere.

Pack:

320ml XA 40011
10 ml XB 40151