Mirror clamp M8 D

Mirror clamp M8 with a right-hand thread. It clamps onto the handlebar tube and gives you a mirror mount where the factory had none – most often needed after a handlebar change or on motocross machines.

• Dimensions from the maker's drawing: width 56 mm, height 27 mm
• Clamp bore Ø 21,7 mm – that is what the outer diameter of your handlebar tube must be at the spot where the clamp is tightened
• Thread M8 right-hand – marked with the letter D; this thread screws in the usual direction
• Tightened with two bolts – the clamp can be removed without taking off the grip
• In the same category list you will find the same clamp with a left-hand thread (K) and an adapter from M10 to M8

To be straight with you: the catalogue uses the same photo for this clamp and the left-hand one, and the thread direction cannot be seen in the photo – only the supplier's designation gives it. Before ordering, look at which way your mirror unscrews: if it unscrews counter-clockwise, the thread is right-hand. Write to us and we will check before you order.

24-month warranty · tel. +370 685 777 56