One-way bearing (bendex) with gear CG125

One-way bearing (bendex) with gear CG125. The maker stamped "57 teeth" on the part itself, and the gear's outer diameter is 118 mm; these are the two numbers you choose this product by.

• On the bendex side, 64 mm, 22 mm and 55 mm are marked; on the gear side – 34 mm and 27 mm
• Which dimension measures what, the maker did not write, so we do not assign meanings to them – we match number to number
• You buy two parts together: the gear and the one-way bearing fixed to it, with two threaded holes
• If you need ONLY the gear without the bendex, there is a separate product in the list – "One-way bearing (bendex) sprocket ATV200"; it also has 118 mm and 57 teeth, but no one-way bearing part
• The one-way bearing (bendex) lets the starter turn the engine and disengages once the engine starts; when worn it slips – the starter screams while the engine does not turn
• The bearing is replaced when play appears, a hum or crackle is heard when turning it by hand, or the rollers leave visible marks in the track
• Supplier code WI ZQ0264 – state it again when ordering

To be straight with you: the "57 teeth" marking was made by the manufacturer on the part itself; we did not count the teeth ourselves, and the manufacturer did not state the crankshaft bore diameter. Which specific model and which years it fits, the manufacturer did not write, and we do not guess – write us your model and year. Before ordering, measure your bendex's outer diameter, the shaft bore and the mounting-hole spacing – or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56