Pair of steering tie rod ends ATV version B

ATV steering tie rod ends, pair, option B: the photo marks 76 mm length, 63 mm height and two different threads — M 12 and M 10.

• Most important: both M marks in the photo sit on the same part. The M 12 arrow rests against the shank that screws into the tie rod tube, and the M 10 arrow rests against the vertical pin that goes into the lever's ear. So the two threads are on one end, not on the two different ends of the pair
• The 76 mm arrow runs along the end, and the 63 mm arrow runs from the pin tip to the bottom of the body
• The photo shows a pressed steel body with a knurled surface, a black boot and a threaded pin with a nut
• The other three pairs in this line are marked differently: on two of them both the shank and the pin are M10, on another both are M12. Only on this one do the shank and the pin differ — M 12 and M 10
• An end is chosen by two things: the thread size at the tie rod's end and the pin thread by which it is fixed to the lever. If even one of them does not match, the part stays on the shelf
• On a tie rod, one end usually has a left-hand thread, the other a right-hand thread: this lets the tie rod's length be adjusted without turning the ends themselves. Turning the rod moves both ends at once
• The shop has four pairs of steering tie rod ends, and they sit in two places: two in the "Chassis & suspension" section and two in the "Tie rods" subcategory. A related ball joint set sits in a third — the "Joints" subcategory
• Time to replace it when moving the end by hand you feel play, when the rubber boot is torn, or when the steering wheel moves freely before the wheels turn
• Supplier code WI ZQ5137+ ZQ5137B — quote it again when ordering

To be straight with you: which thread is left-hand is not marked in the photo. Which specific model and which years this part fits, the maker did not state, and we do not guess — but we can compare dimensions: write us your model and year. Before ordering, measure your old tie rod's thread diameter and the pin thread — or send us a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56