Poket ATV steering rod 135mm M8

Poket ATV steering rod, 135 mm and M8 in the name. The photo marks 135 mm total length, M8 thread and 34 mm end-piece height.

• The 135 mm arrow runs from one end-piece ball to the other end-piece ball — that's the whole rod length assembled
• The M8 arrow covers the vertical pin thread at the top of the end piece, and 34 mm measures the full end-piece height — from the top of the pin to the bottom of the joint housing
• The photo shows the rod is made of a tube threaded at both ends with two screwed-in end pieces and lock nuts
• The second card in this line is marked with a different pin thread, but the length of both is the same — 135 mm. The finish differs too: this one's photo is light, the neighbouring one is yellow zinc plating. Still, pick by the thread
• The end piece is chosen by two things: the thread size at the rod end and the pin thread it fastens to on the lever. If even one doesn't match, the part stays on the shelf
• On steering rods one end piece usually has a left-hand thread, the other a right-hand thread: that's how the rod length is adjusted without turning the end pieces themselves. Turning the rod moves both ends at once
• Time to replace it when you feel play by hand at the end piece, when the rubber boot is torn, or when the steering moves freely before the wheels turn

We'll say it straight. The manufacturer didn't mark the tube's thread size — only the pin thread is marked. Which specific model and year this part is for, the manufacturer didn't state, and we don't guess — but we can compare dimensions for you: write in your model and year. Before ordering, measure your old rod's thread diameter and the pin thread — or send a photo: we'll check before you order.

24-month warranty · tel. +370 685 777 56