Poket ATV steering rod 135mm M10

Poket ATV steering rod, named 135 mm and M10. The photo marks 135 mm overall length, an M10 thread and a 46 mm rod-end height.

• The 135 mm arrow runs from one rod-end ball to the other – that is the rod's full length when assembled
• The M10 arrow covers the vertical pin's thread at the top of the rod end, while 46 mm measures the whole rod end's height – from the top of the pin to the bottom of the joint housing
• The photo shows the rod is made of a tube threaded at both ends, with two screwed-in rod ends secured by lock nuts
• The second card in this row is marked with a different pin thread, while the length of both is the same – 135 mm. The plating also differs: this one is gold-zinc in the photo, the other is bare. Even so, you must choose by the thread
• A rod end is matched by two things: the thread size at the rod's end and the pin thread it is fixed to the arm with. If even one of the two does not match, the part stays on the shelf
• On steering rods, one rod end usually has a left-hand thread and the other a right-hand thread: that way the rod's length is adjusted without turning the rod ends themselves. Turning the rod moves both ends at the same time
• Time to replace it is when you feel play by hand at the rod end, when the rubber boot is torn, or when the handlebar moves freely before the wheels turn

To be straight with you: the maker did not mark the tube's thread size – only the pin thread is marked. Which exact model and year this part fits, the maker did not state, and we do not guess – but we can compare dimensions for you: write us your model and year. Before ordering, measure your old rod's thread diameter and the pin thread – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56