Plastic bushing ATV H20 D23 pin 16 with cap

Plastic ATV bush with cap, marked in the name as H20 D23 and pin 16. The dimensions are marked on the drawing of the neighbouring card in this row.

• Honestly: this card's photo is not its own separate picture. We compared the photos point by point – it matches the neighbouring card's photo with no difference at all, and both cards give the same code from the maker
• So we do not describe the appearance as unique to this card. That row's drawing marks a Ø 16 mm bore, Ø 23 mm body, Ø 30 mm flange and 17 mm height, and the name gives H20
• The photo shows two black bushes, a deeper metal cup and a flat washer. The cup is what the name calls the cap: it covers the end of the bush against dirt
• The bush is chosen by three sizes: the inner bore that fits over the pin, the outer diameter that fits into the lever's bore, and the height, which sets the gap
• The plastic bush holds the lever on the pin and slides without lubricant. As it wears, the lever starts to play, and the handlebar rattles over bumps
• Bushes are replaced in pairs, two per lever end: one worn bush gives the same play as two

To be straight with you: how this card differs from the neighbouring one in the same row, the maker did not explain, and the photo does not tell them apart. Which exact model and which years this bush fits, the maker did not state, and we do not guess – but we can compare dimensions: write us your model and year. Before ordering, measure your pin's diameter and the lever's bore – or send a photo: we will check it before you order.

24-month warranty · tel. +370 685 777 56